Basic Exterior Detail

Our Process:

1.Wheel & Tire cleaning

-Spray the wheels and tires with a dedicated wheel cleaner to dissolve and break down brake dust and grime.

-Agitate wheels with a soft bristle brush and clean the tires with a dedicated stiff brush.

-Rinse thoroughly.

-Last we apply a premium tire dressing to restore a deep black finish along with 3 months worth of protection.

2.Pre rinse

-We apply a high foaming pre wash solution to break down any dirt before any contact is made to ensure we prevent scratches and swirls.

-Let the solution dwell for a few minutes then we use high pressure water to rinse it off.

3.Bug removal

-We apply a dedicated bug remover to the front bumper,grille, and side mirrors.

-We let the product dwell for a few minutes to allow it to break down stubborn bug guts.

-Lastly we Gently agitate affected areas with a microfiber towel, then thoroughly rinse with high pressure water.

4.Contact wash

-We spray the entire vehicle with thick snow foam to break down dirt to prevent swirls and scratches.

-Using the two bucket method we go in with micro fiber wash mits to safely clean the entire vehicle (one bucket with clean soap, one bucket with water for rinsing)

-Lastly we go in with high pressure water to rinse off any remaining soap and debris.

5.Door jamb wipe down

-We open all the doors and trunk and use a damp microfiber towel with a mild cleaner to wipe down and deep clean every crevice and ensure no dirt, grease, and residue is left behind leaving a pristine finish.

6.Exterior window cleaning

-We spray glass cleaner on the front and back glass,mirrors, and all windows.

-We wipe and buff the windows with a micro fiber towel to ensure a stream free finish laving the windows crystal clear

7.Paint sealant (1 month protection)

-Apply a premium paint sealant to provide a glossy finish,depth,protection against UV rays,contaminants, and dirt.

-Buff and shine the product with a microfiber towel.

-The sealant leaves a hydrophobic layer to ensure protection against rain and dirt which makes future washes easier and maintaining the vehicles finish longer.

Our Process:

1.Wheel & Tire cleaning

Spray the wheels and tires with a dedicated wheel cleaner to dissolve and break down brake dust and grime.

Agitate wheels with a soft bristle brush and clean the tires with a dedicated stiff brush.

Rinse thoroughly.

Last we apply a premium tire dressing to restore a deep black finish along with 3 months worth of protection.

2. Wheel well cleaning

We apply a high quality degreaser to break down dirt and mud.

Scrub and agitate degreaser to remove and dirt and grime to ensure a deep quality clean.

Lastly we use high pressure water to blast off any residue to ensure clean and protected wheel wells.

3.Pre rinse

We apply a high foaming pre wash solution to break down any dirt before any contact is made to ensure we prevent scratches and swirls.

Let the solution dwell for a few minutes then we use high pressure water to rinse it off.

4.Bug & Tar removal

We apply a dedicated bug & tar remover to the front bumper, grille, lower panels, and side mirrors.

We let the product dwell for a few minutes to allow it to break down stubborn tar or bugs.

Lastly we Gently agitate affected areas with a microfiber towel, then thoroughly rinse with high pressure water.

5. Contact wash

We spray the entire vehicle with thick snow foam to break down dirt to prevent swirls and scratches.

Using the two bucket method we go in with micro fiber wash mits to safely clean the entire vehicle (one bucket with clean soap, one bucket with water for rinsing)

Lastly we go in with high pressure water to rinse off any remaining soap and debris.

6.Door jamb wipe down

-We open all the doors and trunk and use a damp microfiber towel with a mild cleaner to wipe down and deep clean every crevice and ensure no dirt, grease, and residue is left behind leaving a pristine finish.

7.Clay Mitt treatment (removes embedded contaminants)

lubricate the surface with a dedicated clay lubricant.

Gently glide and work in the clay mitt to remove rough contaminants like tree sap, brake dust, and industrial fallout.

Lastly we use high pressure water to rinse off any residue from the clay lubricant

8. Paint sealant (3 months of protection)

Apply a premium paint sealant to provide a glossy finish, depth, protection against UV rays, contaminants, and dirt.

Buff and shine the product with a microfiber towel.

The sealant leaves a hydrophobic layer to ensure protection against rain and dirt which makes future washes easier and maintaining the vehicles finish longer.